bzx84-v-g-series www.vishay.com vishay semiconductors rev. 1.1, 29-sep-11 1 document number: 83458 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? silicon planar power zener diodes ? the zener voltages are graded according to the international e 24 st andard. standard zener voltage tolerance is 5 %. replace c with b for 2 % tolerance. ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec note ** please see document vishay material category policy: www.vishay.com/doc?99902 primary characteristics parameter value unit v z range nom. 2.4 to 75 v test current i zt 2; 5 ma v z specification pulse current int. construction single 20421 1 2 3 ordering information device name ordering code taped units per reel minimum order quantity bzx84-v-g-series bzx84-v-series-g-18 10 000 (8 mm tape on 13" reel) 10 000 bzx84-v-g-series bzx84-v-series-g-08 3000 (8 mm tape on 7" reel) 15 000 package package name weight molding compound flammability rating moisture sensitivity level soldering conditions sot-23 8.1 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings parameter test condition symbol value unit power dissipation t amb = 25 c, device on fiberglass substrate, acc. layout on page 7 p tot 300 mw thermal resistance junction to ambient air t amb = 25 c, device on fiberglass substrate, acc. layout on page 7 r thja 420 k/w junction temperature t j 150 c storage temperature range t stg - 65 to + 150 c
bzx84-v-g-series www.vishay.com vishay semiconductors rev. 1.1, 29-sep-11 2 document number: 83458 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range test current reverse leakage current dynamic resistance temperature coefficient v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 ? vz at i zt1 v ma a v ? 10 -4 /c min. nom. max. max. max. min. max. bzx84c2v4-v-g g50 2.2 2.4 2.6 5 1 50 1 100 275 - 9 - 4 bzx84c2v7-v-g g51 2.5 2.7 2.9 5 1 20 1 100 600 - 9 - 4 bzx84c3v0-v-g g52 2.8 3.0 3.2 5 1 10 1 95 600 - 9 - 3 bzx84c3v3-v-g g53 3.1 3.3 3.5 5 1 5 1 95 600 - 8 - 3 bzx84c3v6-v-g g54 3.4 3.6 3.8 5 1 5 1 90 600 - 8 - 3 bzx84c3v9-v-g g55 3.7 3.9 4.1 5 1 3 1 90 600 - 7 - 3 bzx84c4v3-v-g g56 4.0 4.3 4.6 5 1 3 1 90 600 - 6 - 1 bzx84c4v7-v-g g57 4.4 4.7 5.0 5 1 3 2 80 500 - 5 2 bzx84c5v1-v-g g58 4.8 5.1 5.4 5 1 2 2 60 480 - 3 4 bzx84c5v6-v-g g59 5.2 5.6 6.0 5 1 1 2 40 400 - 2 6 bzx84c6v2-v-g g60 5.8 6.2 6.6 5 1 3 4 10 150 - 1 7 bzx84c6v8-v-g g61 6.4 6.8 7.2 5 1 2 4 15 80 2 7 bzx84c7v5-v-g g62 7.0 7.5 7.9 5 1 1 5 15 80 3 7 bzx84c8v2-v-g g63 7.7 8.2 8.7 5 1 0.7 5 15 80 4 7 bzx84c9v1-v-g g64 8.5 9.1 9.6 5 1 0.5 6 15 100 5 8 bzx84c10-v-g g65 9.4 10 10.6 5 1 0.2 7 20 150 5 8 bzx84c11-v-g g66 10.4 11 11.6 5 1 0.1 8 20 150 5 9 BZX84C12-V-G g67 11.4 12 12.7 5 1 0.1 8 25 150 6 9 bzx84c13-v-g g68 12.4 13 14.1 5 1 0.1 8 30 170 7 9 bzx84c15-v-g g69 13.8 15 15.6 5 1 0.05 10.5 30 200 7 9 bzx84c16-v-g g70 15.3 16 17.1 5 1 0.05 11.2 40 200 8 9.5 bzx84c18-v-g g71 16.8 18 19.1 5 1 0.05 12.6 45 225 8 9.5 bzx84c20-v-g g72 18.8 20 21.2 5 1 0.05 14.0 55 225 8 10 bzx84c22-v-g g73 20.8 22 23.3 5 1 0.05 15.4 55 250 8 10 bzx84c24-v-g g74 22.8 24 25.6 5 1 0.05 16.8 70 250 8 10 bzx84c27-v-g g75 25.1 27 28.9 2 0.5 0.05 18.9 80 300 8 10 bzx84c30-v-g g76 28 30 32 2 0.5 0.05 21.0 80 300 8 10 bzx84c33-v-g g77 31 33 35 2 0.5 0.05 23.1 80 325 8 10 bzx84c36-v-g g78 34 36 38 2 0.5 0.05 25.2 90 350 8 10 bzx84c39-v-g g79 37 39 41 2 0.5 0.05 27.3 130 350 10 12 bzx84c43-v-g g80 40 43 46 2 0.5 0.05 30.1 150 375 10 12 bzx84c47-v-g g81 44 47 50 2 0.5 0.05 32.9 170 375 10 12 bzx84c51-v-g g82 48 51 54 2 0.5 0.05 35.7 180 400 10 12 bzx84c56-v-g g83 52 56 60 2 0.5 0.05 39.2 200 425 9 11 bzx84c62-v-g g84 58 62 66 2 0.5 0.05 43.4 215 450 9 12 bzx84c68-v-g g85 64 68 72 2 0.5 0.05 47.6 240 475 10 12 bzx84c75-v-g g86 70 75 79 2 0.5 0.05 52.5 255 500 10 12
bzx84-v-g-series www.vishay.com vishay semiconductors rev. 1.1, 29-sep-11 3 document number: 83458 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bzx84b2v4-v-g h50 2.35 2.4 2.45 5 1 50 1 100 275 - 9 - 4 bzx84b2v7-v-g h51 2.65 2.7 2.75 5 1 20 1 100 600 - 9 - 4 bzx84b3v0-v-g h52 2.94 3.0 3.06 5 1 10 1 95 600 - 9 - 3 bzx84b3v3-v-g h53 3.23 3.3 3.37 5 1 5 1 95 600 - 8 - 3 bzx84b3v6-v-g h54 3.53 3.6 3.67 5 1 5 1 90 600 - 8 - 3 bzx84b3v9-v-g h55 3.82 3.9 3.98 5 1 3 1 90 600 - 7 - 3 bzx84b4v3-v-g h56 4.21 4.3 4.39 5 1 3 1 90 600 - 6 - 1 bzx84b4v7-v-g h57 4.61 4.7 4.79 5 1 3 2 80 500 - 5 2 bzx84b5v1-v-g h58 5.0 5.1 5.2 5 1 2 2 60 480 - 3 4 bzx84b5v6-v-g h59 5.49 5.6 5.71 5 1 1 2 40 400 - 2 6 bzx84b6v2-v-g h60 6.08 6.2 6.32 5 1 3 4 10 150 - 1 7 bzx84b6v8-v-g h61 6.66 6.8 6.94 5 1 2 4 15 80 2 7 bzx84b7v5-v-g h62 7.35 7.5 7.65 5 1 1 5 15 80 3 7 bzx84b8v2-v-g h63 8.04 8.2 8.36 5 1 0.7 5 15 80 4 7 bzx84b9v1-v-g h64 8.92 9.1 9.28 5 1 0.5 6 15 100 5 8 bzx84b10-v-g h65 9.8 10 10.2 5 1 0.2 7 20 150 5 8 bzx84b11-v-g h66 10.8 11 11.2 5 1 0.1 8 20 150 5 9 bzx84b12-v-g h67 11.8 12 12.2 5 1 0.1 8 25 150 6 9 bzx84b13-v-g h68 12.7 13 13.3 5 1 0.1 8 30 170 7 9 bzx84b15-v-g h69 14.7 15 15.3 5 1 0.05 10.5 30 200 7 9 bzx84b16-v-g h70 15.7 16 16.3 5 1 0.05 11.2 40 200 8 9.5 bzx84b18-v-g h71 17.6 18 18.4 5 1 0.05 12.6 45 225 8 9.5 bzx84b20-v-g h72 19.6 20 20.4 5 1 0.05 14 55 225 8 10 bzx84b22-v-g h73 21.6 22 22.4 5 1 0.05 15.4 55 250 8 10 bzx84b24-v-g h74 23.5 24 24.5 5 1 0.05 16.8 70 250 8 10 bzx84b27-v-g h75 26.5 27 27.5 2 0.5 0.05 18.9 80 300 8 10 bzx84b30-v-g h76 29.4 30 30.6 2 0.5 0.05 21 80 300 8 10 bzx84b33-v-g h77 32.3 33 33.7 2 0.5 0.05 23.1 80 325 8 10 bzx84b36-v-g h78 35.3 36 36.7 2 0.5 0.05 25.2 90 350 8 10 bzx84b39-v-g h79 38.2 39 39.8 2 0.5 0.05 27.3 130 350 10 12 bzx84b43-v-g h80 42.1 43 43.9 2 0.5 0.05 30.1 150 375 10 12 bzx84b47-v-g h81 46.1 47 47.9 2 0.5 0.05 32.9 170 375 10 12 bzx84b51-v-g h82 50 51 52 2 0.5 0.05 35.7 180 400 10 12 bzx84b56-v-g h83 54.9 56 57.1 2 0.5 0.05 39.2 200 425 9 11 bzx84b62-v-g h84 60.8 62 63.2 2 0.5 0.05 43.4 215 450 9 12 bzx84b68-v-g h85 66.6 68 69.4 2 0.5 0.05 47.6 240 475 10 12 bzx84b75-v-g h86 73.5 75 76.5 2 0.5 0.05 52.5 255 500 10 12 electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range test current reverse leakage current dynamic resistance temperature coefficient v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 ? vz at i zt1 v ma a v ? 10 -4 /c min. nom. max. max. max. min. max.
bzx84-v-g-series www.vishay.com vishay semiconductors rev. 1.1, 29-sep-11 4 document number: 83458 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward characteristics fig. 2 - admissible power dissipation vs. ambient temperature fig. 3 - dynamic resistance vs. zener current fig. 4 - dynamic resistance vs. zener current fig. 5 - dynamic resistance vs. zener current fig. 6 - thermal differential resistance vs. zener voltage 18114 ma 10 3 10 2 10 -1 10 -2 10 -3 10 -4 10 -5 10 1 i f v f 0 0.2 0.4 0.6 0.8 1v t j = 100 c t j = 25 c 18115 mw 400 100 0 300 200 p tot t amb 0 100 200 c 500 18117 1000 5 4 3 2 5 4 3 2 100 1 r zj 0.1 25 25 110 i z t j = 25 c 2.7 5 4 3 2 10 25 100 ma 3.6 4.7 5.1 5.6 18119 100 5 4 3 2 5 4 3 2 10 r zj 0.1 25 25 110 i z 1 25 100 ma t j = 25 c 33 27 22 18 15 12 10 6.8/8.2 6.2 18120 10 3 7 5 4 3 2 7 5 4 3 2 10 0.1 2345 2345 110 ma r zj i z t j = 25 c 47 + 51 43 39 36 10 2 18121 10 3 5 4 3 2 5 4 3 2 10 2 1 r zth 5 4 3 2 10 k/w 1 2345 2345 10 100 v v z at i z = 5 ma negative positive v z t j r zth = r tha x v z x
bzx84-v-g-series www.vishay.com vishay semiconductors rev. 1.1, 29-sep-11 5 document number: 83458 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - dynamic resist ance vs. zener voltage fig. 8 - temperature dependence of zener voltage vs. zener voltage fig. 9 - change of zener vo ltage vs. junction temperature fig. 10 - temperature dependence of zener voltage vs. zener voltage fig. 11 - change of zener vo ltage vs. junction temperature fig. 12 - change of zener voltage from turn-on up to the point of thermal equilibrium vs. zener voltage 18122 100 7 5 4 3 2 7 5 4 3 2 1 r zj 10 t j = 25 c i z = 5 ma 1 2345 2345 10 100 v v z 18123 25 20 15 10 5 0 - 5 mv/c v z t j 1 2345 2345 10 100 v v z 5 ma 1 ma 20 ma i z = 18124 v z at i z = 5 ma 25 15 10 8 7 6.2 5.9 5.6 5.1 4.7 3.6 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 - 1 - 0.2 v z v t j 020406080 100 120 140 c 18125 100 80 60 40 20 0 mv/c v z t j 0 20 40 80 60 100 v v z i z = 5 ma 18126 9 7 5 3 1 - 1 v v z 8 6 4 2 0 0 100 60 t j 20 40 120 80 140 c i z = 2 ma 51 43 36 18127 1.6 1.2 0.8 0.4 0 - 0.4 v v z 1.4 1 0.6 0.2 - 0.2 1 2345 2345 10 100 v v z at i z = 5 ma v z = r zth x i z
bzx84-v-g-series www.vishay.com vishay semiconductors rev. 1.1, 29-sep-11 6 document number: 83458 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 13 - change of zener voltage from turn-on up to the point of thermal equilibrium vs. zener voltage fig. 14 - breakdown characteristics fig. 15 - breakdown characteristics fig. 16 - breakdown characteristics 18128 5 4 3 2 1 0 v v z 0 20 40 60 80 100 v v z i z = 5 ma i z = 2 ma v z = r zth x i z 18111 test current i z 5 ma 1 23456789 0 10 v v z 3.3 3.9 5.6 2.7 ma 50 40 30 20 10 0 l z t j = 25 c 8.2 6.8 4.7 18112 10 20 30 0 40 v v z ma 30 20 10 0 l z 33 test current i z 5 ma t j = 25 c 10 12 15 18 22 27 36 18113 ma 10 8 6 4 2 0 l z 10 20 30 40 50 60 70 80 90 0 100 v v z 43 39 test current i z 5 ma t j = 25 c 47 51
bzx84-v-g-series www.vishay.com vishay semiconductors rev. 1.1, 29-sep-11 7 document number: 83458 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 layout for r ? ; ja test thickness: fiberglass 0.059" (1.5 mm) copper leads 0.012" (0.3 mm) package dimensions in millimeters (inches): sot-23 17451 15 (0.59) 12 (0.47) 0.8 (0.03) 5 (0.2) 7.5 (0.3) 3 (0.12) 1 (0.4) 1 (0.4) 2 (0.8) 2 (0.8) 1.5 (0.06) 5.1 (0.2) foot print recommendation: rev. 8 - date: 23. s ept.2009 17418 document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.95 (0.037) 0.95 (0.037) 2 (0.079) 0.7 (0.028) 0.9 (0.035) 0 to 8 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
